SAR Harrier Sit Harness

The Harrier Sit Harness has been re-designed and upgraded to a user rating of 150Kg. The harness is designed for rope access and technical rescue service personnel who prefer a separate sit and chest harness format to that of a multi purpose full body harness.

The Harrier, like the Merlin and Raptor, has the innovative pattern that includes two independent front waist attachment points in different profiles so that rope access and rescue technicians can utilise any type of rope descender without twisting the system.

The Harrier has a wrap around fitting system for ease of donning, which also stops the harness getting soiled, as is common with the step in type harness. The QC style has Quick Clip buckles on the leg loops and can also be made with QC buckles on the waist if so required.

The Harrier Sit Harness has also been designed to be used with any of the SAR chest harness range, as well as it’s own Harrier Chest Harness models, as seen below.

Specifications:

• Rated to 150kg
• Two independent front attachment points – Belay loop 30kN & ‘D’ 25kN
• Two side ‘D’ work positioning attachment points (Harrier 4 models only)
• Four reinforced gear rack loops & four plastic gear loops
• Fully adjustable waist and legs with twin adjustment on the waist
• Foam padding with shaped waist and legs for extra comfort
• Waist circumference: Min 74cm – Max 114cm.
• Leg/Thigh circumference: Min 42cm – Max 70cm.
• Weight – Harrier 2: 1.1Kg
• Weight – Harrier 4: 1.3Kg

Product Codes:

Harrier 2 –

• Standard: H0079
• QC (Leg only): H0079QC
• Full QC: H0079FQC

Harrier 4 –

• Standard: H0081
• QC (Leg only): H0081QC
• Full QC: H0081FQC

SAR Harrier Chest Harness

The Harrier Chest Harness & Harrier Chest Plus Harness are a new design to accompany the Harrier sit harness range. Made using high grade polyester webbing and the shoulders are padded with high grade closed cell foam.

This harness utilises a triple action karabiner on the front to attach to the Harrier Sit Harness. The Harrier Chest Plus has a sewn in ascender and connects to the front of the sit harness with a maillon. Both of these harnesses can be threaded into the back of the Harrier Sit Harness models meaning they can be permanently attached or replaced if damaged in anyway.

Both models of Harrier have a quick clip buckle on the shoulder to allow faster donning or removal.

This harness must NOT be used on it’s own. 

Specifications:

• Rated to 150kg
• High grade polyester webbing throughout
• Close cell foam shoulder and back pad
• Front sternal ‘D’ fall arrest point only
• Weight:
  • Harrier chest: 650g
  • Harrier chest plus: 800g

Product Codes:

Harrier Chest: H0078
Harrier Chest Plus: H0078PL