Highly modular, multi-gas portable gas monitor for detection of explosive, oxygen, and toxic gas hazards. Suitable for use in potentially explosive atmospheres, indoors, and outdoors. Fitted with up to 6 sensors, including 3 high power. Up to 4 x 1 Series and 2 x 4 Series sensors may be selected from over 20 different types for a wide range of safety applications. Available in 3 fundamental configurations of 4- and 6-way Available in 3 fundamental configurations of 4 and 6 way cartridges (diffusion), and 6-way cartridge with built in pump. Can be ordered or configured later as required by users with appropriate training

Alarms and Type

Visual, Vibrating, Audible (95 dB at 30cm), 3 x Instantaneous, TWA, STEL, Negative Drift, Over Limit, Battery, System Integrity

Logged Information

Event log: All system and sensor critical events with user acknowledgement where required.
Data log: System and sensor specific readings at defined interval for 15-120s (user configurable)
Configuration log: Factory default, instrument restore point (user configurable), current settings, with full change history
Calibration History: Full calibration history of a given device up to and including last 10 calibrations
Advanced diagnostics: System, sensor, battery, and user operational related log for maintenance and life time operation assistance.

ActionTAGs

All new "actionTAG" included as standard enabling quick and easy situational changes in device operation
• USER tag: Easy identification of users or change of service e.g. “out for repair”.
• ACCESSORY tag: Tag sampling accessories for simple verification of gas type compatibility and set operation automatically
• BUMP tag: Initiate a BUMP test by scanning a gas cylinder tag with full traceability and 100% validation
• CALIBRATION tag: Read calibration gas cylinder set up and complete the "guided" calibration routine
• LOCATION tag: Check an asset name, item number, verify location, or entry to a confined space, all can be programmed All actionTAGs are AES-128 bit encrypted or higher. User programmed via PC or mobile device software

Certified: -20°C to 60°C (-4°F to 140°F), operational range is sensor dependent
Waterproof, independently tested IP66 & IP68 (diffusion), IP65 (pumped) 
Operating Humidity conditions dependent upon sensors. Generally 0-99%rH (non-condensing) is recommended