Honeywell Midas-0235-0095

Require Install, Commissioning, Calibration or Servicing?

Safety Gear Store are able to install, commission and service your fixed gas detection system. We offer a professional service from fully trained, certified and manufacturer approved engineers, we are also one of the only suppliers with engineers that carry spares in their vehicles to ensure a quick and efficient service that will enable you to continue using your facility.
For more information on what we offer please visit one of the below pages:

Fixed Gas Detection System Install and Commissioning

Fixed Gas Detection System Calibration and Servicing

The Midas-M is a Fixed Extractive Single Point with 4-in-1 Multi Gas Detector to detect more than 30 gases - precisely, easily, quickly, that draws a sample locally or from a remote point to a sensor cartridge that is located inside the detector's chassis. A side range of toxic, flammable and oxygen gas sensor cartridges are available that enable detection of gases used or generated in the Semiconductor and other manufacturing industries. Transmitters are powered by 24VDC or via Power over Ethernet (PoE). Midas provides 0-22 mA analog or Modbus/TCP Ethernet as outputs. Integral general relays for A1, A2 and fault are included, and may be configured normally open or normally closed, latching or non-latching. Transmitters include Manual, Quick Start Guide, and (1) PG16 gland fitting for power in and relays out, 1/4” O.D.x 1/8” I.D. Sample Inlet tubing (10’) [3m], 1/4” O.D x 3/16” I.D. Exhaust tubing (10’) [3m], and a sample line tubing duct adapter (1283K1090). Generation 2 features a multi-coloured backlight to indicate status.

Features & Benefits:

• Over *33 gases available with 2 year warranty : 17 gases available at launch
• 4-in-1 multi smart sensor cartridge with on board * ‘e-calibration’ certificate
• Modular design for easy to use and service (front, pump, sensor cartridge, main and base)
• 3 built in relays (Form C) for Alarm 1, 2 and Fault
• Power over Ethernet (PoE) communication
• Keypad interface and remote web browser interface
• Factory-calibrated sensors to reduce need for frequent gas testing
• Isolated 0-21 mA analog output with fault and event reporting
• Modbus/TCP Ethernet for easy connectivity to all control and alarm systems ports for control connectivity and service interaction
• Robust extractive pump system (2 year lifetime) sampling up to 100 feet

Quick Specs:

• Flow Rate: 500 mL/min
• Transport Time: 2 to 30 seconds maximum
• Sample Line Tubing: 0.125 in ID x 0.25 in OD